If you do not see the answer to your questions about EEZOX® on this page, please feel free to email us and we will do our level best to answer it for you.
Q. Will Eezox® build up in my barrel and need cleaned out with anything else?
A. Absoutely not. There are no additives that can cause a buildup, such as teflon or molly. Use ONLY Eezox® on your firearm metal. There is never a need for any other product, including oil or grease. As a matter of fact, that is one of the main reasons to use Eezox®, so that you don't need all those dirt catching, action gumming products.
Q. How can Eezox® prevent rust without using oil or grease?
A. Eezox® is a three part, all synthetic combination of cleaners, dry lubricant and rust preventive that is much heavier than water. When it penetrates the metal, it will not allow moisture of any kind (including salt water) to get in.
Q. Is Eezox® safe for my wood stock?
A. Eezox® will not harm original wood stocks. Do not apply Eezox® to a painted or urethane coated stock.
Q. Do I have to reapply Eezox® over the entire gun each time I use it to maintain rust proofing?
A. No. The first time you clean your firearm, it should be taken down as far as practical. Thoroughly clean all the grease, oil, dirt and other previous solvents from the metal, using ONLY EEZOX®. When you are happy that your gun is completely clean, wipe it dry with a cloth and then apply a THIN coat of Eezox® and set it aside to dry. Do not allow EEZOX® to pool and dry, especially on semiautos. If the EEZOX® has not dried to the touch within a couple of hours, you have applied too much....wipe dry with a soft cloth. Reassemble your firearm and you are protected from rust, even around salt water. A quick bore cleaning and light wipe down of exposed metal and you are good to go.
Q. Can Eezox® be used on metals other than firearms?
A. Eezox® can be used on ANY METAL... even stainless. Eezox® will penetrate rusted bolts, free up locks, clean grinding wheels, printing press chain drives, metal electrical contacts and many hundreds of other uses.
Q. I shoot cast bullets. Will Eezox® get the lead out?
A. It sure will. Once you have given your bore a good first cleaning with Eezox®, you will find that your bore will lead a whole lot less. As a matter of fact you will notice that it leads less and less with each successive bore cleaning using only Eezox®.
Q. I hunt whitetails and varmints. Will the smell of Eezox® have much of an affect on them?
A. Once the cleaning agent in Eezox® has evaporated, the very slight lingering smell is akin to that of a fresh mowed wheat field. It is a very subtle smell and will not be offensive to game animals.
Q. What about reloading presses and die sets? Can I use Eezox® on them too?
A. Yes you can. Eezox® does a great job on both counts. Once you start cleaning your presses and die sets with Eezox®, you will find that they will operate very smoothly, will not rust and will not accumulate grit and grime like they did when you cleaned them with other products. As always, keep in mind that a little bit of Eezox® goes a long way. Your press and die sets should be dry to the touch when you are finished.
Q. Does EEZOX® need to be shaken or stirred before each use?
A. No, it doesn't. There are no solids in EEZOX® and the liquids do not separate.